PDA

View Full Version : Question nokia C6-00 hanya getar saja !!


Pages : [1] 2

Rusman
19th May 2011, 20:21
mohon solusi nokia C6-00 Rm 612 di hidupkan cuma bergetar saja gk mau hidup di flash di atf sukses tapi gk mau local mode
Number of Image Files: 5

Processing Image File :
RM-612_11.0.029_prd.core.C00
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 482
Entry Point: 0x2AA869
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-612_11.0.029_C01_prd.rofs3.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 5
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00000E00

Processing Image File :
RM-612_11.0.029_prd.rofs2.V32
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 142
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-612_11.0.029_uda_11_001.uda.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 77
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 15
Entry Point: 0x0136
Page Format : -1
MAX PAGE : 0x00040000



AUTO SELECTED DEAD USB FLASHING...

If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...

1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..

AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 400C1921
ID DWORD 4 : 01051103
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 0CF00113
ID DWORD 1 : FDD38D52
ID DWORD 2 : F0BEA257
ID DWORD 3 : DD5435F4
ID DWORD 4 : 1D80FED1
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 47 9C 6D DE 39 42 E1 2C 42 9C 1D 6A DE D8 03 71
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 4B9B7510
CRC 1 : 3E691FF8
START FLASHING
RawLoaderExtract: Processing RM-612_11.0.029_prd.core.C00
RawLoaderExtract: Image matches with RootKey Hash, Extraction is done
Parsed OK
RAW LOADER SENT..
FAST PHONE....
(Upto 50 seconds on OLDER phones)
Update Agent Sent..
Waiting for phone to ADL ... (Make take a while)
Found Nokia BB5 ADL Loader USB Generic..
EraseFile: Processing RM-612_11.0.029_prd.core.C00
>> Erasing area 0x00040000 - 0x00082FFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00083400 - 0x003FFFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00800000 - 0x00D5FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00D60000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00040000 - 0x00082FFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00083400 - 0x003FFFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00800000 - 0x00D5FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00D60000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_11.0.029_prd.core.C00
Total blocks to write : 482
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : SOS*UPDAPP
>> CMT Rootkey Hash CERT : SOS*DSP0
>> CMT Rootkey Hash CERT : SOS*ISASW
>> CMT Rootkey Hash CERT : SOS+CORE
>> CMT Rootkey Hash CERT : SOS+ROFS1
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_11.0.029_C01_prd.rofs3.fpsx
>> Erasing area 0x0C4A0000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_11.0.029_C01_prd.rofs3.fpsx
Total blocks to write : 5
>> CMT Rootkey Hash CERT : SOS+ROFS3
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_11.0.029_prd.rofs2.V32
>> Erasing area 0x094A0000 - 0x0C49FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_11.0.029_prd.rofs2.V32
Total blocks to write : 142
>> CMT Rootkey Hash CERT : SOS+ROFS2
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_11.0.029_uda_11_001.uda.fpsx
>> Erasing area 0x0D3C0000 - 0x1EF7FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_11.0.029_uda_11_001.uda.fpsx
Total blocks to write : 77
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
>> Erasing area 0x00400000 - 0x007FFFFF, Type: NAND, Subsystem: CMT
Processing : RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
Total blocks to write : 15
>> CMT Rootkey Hash CERT : SOS*ENO
Continue Flash Complete : : No Error - 0 (0x00)
Flashing Done..

Total Flashing Time (Erase + Flashing) : 00:01:12
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 100 seconds)

If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time: 5 Seconds...
Elapsed Time: 10 Seconds...
Elapsed Time: 15 Seconds...
Elapsed Time: 20 Seconds...
Elapsed Time: 25 Seconds...
Elapsed Time: 30 Seconds...
Elapsed Time: 35 Seconds...
Elapsed Time: 40 Seconds...
Elapsed Time: 45 Seconds...
Elapsed Time: 50 Seconds...
Elapsed Time: 55 Seconds...
Elapsed Time: 60 Seconds...
Elapsed Time: 65 Seconds...
Elapsed Time: 70 Seconds...
Elapsed Time: 75 Seconds...
Elapsed Time: 80 Seconds...
Elapsed Time: 85 Seconds...
Elapsed Time: 90 Seconds...
Elapsed Time: 95 Seconds...
Elapsed Time: 100 Seconds...


WARNING: Phone is not in the Required Mode...
Disconnect the Phone and Power it Up Manually.
To view links or images in this forum your post count must be 20 or greater. You currently have 0 posts.

ADINDUN
19th May 2011, 20:29
kurang tinggi tu versinya ......

Rusman
19th May 2011, 20:58
Number of Image Files: 5

Processing Image File :
RM-612_20.0.041_prd.core.C00
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 479
Entry Point: 0x2AA869
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-612_20.0.041_C01_prd.rofs3.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 5
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00000E00

Processing Image File :
RM-612_20.0.041_prd.rofs2.V32
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 153
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-612_20.0.041_uda_11_001.uda.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 73
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 15
Entry Point: 0x0136
Page Format : -1
MAX PAGE : 0x00040000



AUTO SELECTED DEAD USB FLASHING...

If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...

1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..

AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 400C1921
ID DWORD 4 : 01051103
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 0CF00113
ID DWORD 1 : FDD38D52
ID DWORD 2 : F0BEA257
ID DWORD 3 : DD5435F4
ID DWORD 4 : 1D80FED1
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 47 9C 6D DE 39 42 E1 2C 42 9C 1D 6A DE D8 03 71
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 4B9B7510
CRC 1 : 3E691FF8
START FLASHING
RawLoaderExtract: Processing RM-612_20.0.041_prd.core.C00
RawLoaderExtract: Image matches with RootKey Hash, Extraction is done
Parsed OK
RAW LOADER SENT..
FAST PHONE....
(Upto 50 seconds on OLDER phones)
Update Agent Sent..
Waiting for phone to ADL ... (Make take a while)
Found Nokia BB5 ADL Loader USB Generic..
EraseFile: Processing RM-612_20.0.041_prd.core.C00
>> Erasing area 0x00040000 - 0x00082FFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00083400 - 0x003FFFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00800000 - 0x00D5FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00D60000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00040000 - 0x00082FFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00083400 - 0x003FFFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00800000 - 0x00D5FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00D60000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_20.0.041_prd.core.C00
Total blocks to write : 479
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : SOS*UPDAPP
>> CMT Rootkey Hash CERT : SOS*DSP0
>> CMT Rootkey Hash CERT : SOS*ISASW
>> CMT Rootkey Hash CERT : SOS+CORE
>> CMT Rootkey Hash CERT : SOS+ROFS1
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_20.0.041_C01_prd.rofs3.fpsx
>> Erasing area 0x0C4A0000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_20.0.041_C01_prd.rofs3.fpsx
Total blocks to write : 5
>> CMT Rootkey Hash CERT : SOS+ROFS3
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_20.0.041_prd.rofs2.V32
>> Erasing area 0x094A0000 - 0x0C49FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_20.0.041_prd.rofs2.V32
Total blocks to write : 153
>> CMT Rootkey Hash CERT : SOS+ROFS2
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_20.0.041_uda_11_001.uda.fpsx
>> Erasing area 0x0D3C0000 - 0x1EF7FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_20.0.041_uda_11_001.uda.fpsx
Total blocks to write : 73
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
>> Erasing area 0x00400000 - 0x007FFFFF, Type: NAND, Subsystem: CMT
Processing : RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
Total blocks to write : 15
>> CMT Rootkey Hash CERT : SOS*ENO
Continue Flash Complete : : No Error - 0 (0x00)
Flashing Done..

Total Flashing Time (Erase + Flashing) : 00:01:12
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 100 seconds)

If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time: 5 Seconds...
Elapsed Time: 10 Seconds...
Elapsed Time: 15 Seconds...
Elapsed Time: 20 Seconds...
Elapsed Time: 25 Seconds...
Elapsed Time: 30 Seconds...
Elapsed Time: 35 Seconds...
Elapsed Time: 40 Seconds...
Elapsed Time: 45 Seconds...
Elapsed Time: 50 Seconds...
Elapsed Time: 55 Seconds...
Elapsed Time: 60 Seconds...
Elapsed Time: 65 Seconds...
Elapsed Time: 70 Seconds...
Elapsed Time: 75 Seconds...
Elapsed Time: 80 Seconds...
Elapsed Time: 85 Seconds...
Elapsed Time: 90 Seconds...
Elapsed Time: 95 Seconds...
Elapsed Time: 100 Seconds...


WARNING: Phone is not in the Required Mode...
Disconnect the Phone and Power it Up Manually.
masih juga nie udah naik versi tinggi

Rusman
20th May 2011, 10:19
sundul lagii........................

By_Lock
20th May 2011, 10:33
maksimalkan sotware dulu bos....

wdoubleudot
20th May 2011, 10:42
setubuh juragan ,...maksimalin softwarenya dulu ntuuu

Rusman
20th May 2011, 10:49
ini log di cyclone........
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.61, (May 10 2011 21:52:47, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: xxxxxxxxxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk32 / 2010, wk01
Initializing security card...
Card Serial Number: xxxxxxxxxxxxxxxxx
Card Firmware Revision: 010A
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5,00v PASSED
MCU Voltage 3,31v PASSED
Core Voltage 1,79v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,96v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Retrieving Variants for Product - wait...
Failed to retrieve BB5 Variants -> Unexpected error, no VPL or neither INI files found inside Product Directory
Retrieving Variants for Product - wait...
Failed to retrieve BB5 Variants -> Unexpected error, no VPL or neither INI files found inside Product Directory
Retrieving Variants for Product RM-198 - wait...
135 Variants Retrieved
Retrieving Variants for Product RM-612 - wait...
6 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CF00113FDD38D52F0BEA257DD5435F41D80FED1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
DeadUSB.alg, Type: Algorithm, Rev: , Algo: XSR 1.6
Sending CMT RAW Algorithm...
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing RM-612_20.0.041_prd.core.C00 (CMT)...
RM-612_20.0.041_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x0D39FFFF, ONENAND
Erase Partition (CMT)
Erase taken 1.219s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
All blocks written OK! Time taken 34.62s
Flashing Speed: 26925,09 kBit/S
Processing RM-612_20.0.041_prd.rofs2.V32 (CMT)...
RM-612_20.0.041_prd.rofs2.V32, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x094A0000-0x0C49FFFF, ONENAND
Erase taken 0.282s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
All blocks written OK! Time taken 11.954s
Flashing Speed: 26086,53 kBit/S
Processing RM-612_20.0.041_C01_prd.rofs3.fpsx (CMT)...
RM-612_20.0.041_C01_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0C4A0000-0x0D39FFFF, ONENAND
Erase taken 0.110s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
All blocks written OK! Time taken 0.47s
Flashing Speed: 1387,91 kBit/S
Processing RM-612_20.0.041_uda_11_001.uda.fpsx (CMT)...
RM-612_20.0.041_uda_11_001.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0D3C0000-0x1EF7FFFF, ONENAND
Erase taken 0.47s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
All blocks written OK! Time taken 6.172s
Flashing Speed: 24607,33 kBit/S
Processing RM612_APE_ONLY_ENO_10w20_v0.014.fpsx (CMT)...
RM612_APE_ONLY_ENO_10w20_v0.014.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
Erase taken 0.47s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS*ENO Certificate...
All blocks written OK! Time taken 0.859s
Flashing Speed: 26194,39 kBit/S
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
To view links or images in this forum your post count must be 20 or greater. You currently have 0 posts.

DJ LIEM
20th May 2011, 10:58
biasanya kasus gini klo dah mak sw nya mslh di ic flashnya coba rehot asal bukan samsung...klo samsung suka bandel

putradallas
20th May 2011, 11:05
cek flexibel nya dulu

Rusman
20th May 2011, 11:18
MXKEY Serial: [MxKey HTI FLASHER INTERFACE 7] - xxxxxxxxxxxxx
Driver: NMWCD, ver: 7.1.32.62, NTMP ver:
Module ver: 1.0.0.16978(13-05-2011), Library ver: 1.0.0.10071(13-05-2011)
Processing MCU file: RM-612_20.0.041_prd.core.C00
[BB5,XSR 1.6] size: 109.33 MB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 31651F33
CMT SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 0CF00113FDD38D52F0BEA257DD5435F41D80FED1
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID: 4B9B75103E691FF8
Flashing CMT Update Server Data, ULO: 0x3B80 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, XSR: 0x2A4989 bytes
Update Server code succesfully sent to phone.
Device found: nmwcdnsuc\Nokia BB5 ADL Loader USB Generic, PORT_ID: D3DAC19
Verifying communication to device OK.
Partitioning....
Partitioning complete
Erase size: 207.44 MB
CMT MuxOneNAND area [00040000-00082FFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: 505A5C85580A6322C103BFE4E67B73EF478E791C (RAP Certificate v1 228) sent
CMT SOS*UPDAPP block sent
CMT SOS*DSP0 block sent
CMT SOS*ISASW block sent
CMT SOS+CORE block sent
CMT SOS+ROFS1 block sent
Programming completed in 49.953 s
Processing PPM file: RM-612_20.0.041_prd.rofs2.V32
[BB5,XSR 1.6] size: 37.17 MB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 48 MB
CMT MuxOneNAND area [094A0000-0C49FFFF]
Flash programming ...
CMT SOS+ROFS2 block sent
Programming completed in 16.687 s
Processing PPM file: RM-612_20.0.041_C01_prd.rofs3.fpsx
[BB5,XSR 1.6] size: 7.96 KB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 15 MB
CMT MuxOneNAND area [0C4A0000-0D39FFFF]
Flash programming ...
CMT SOS+ROFS3 block sent
Programming completed in 0.078 s
Processing CNT file: RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
[BB5,XSR 1.6] size: 2.68 MB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 4 MB
CMT MuxOneNAND area [00400000-007FFFFF]
Flash programming ...
CMT SOS*ENO block sent
Programming completed in 1.265 s
Processing CNT file: RM-612_20.0.041_uda_11_001.uda.fpsx
[BB5,XSR 1.6] size: 18.11 MB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 283.75 MB
CMT MuxOneNAND area [0D3C0000-1EF7FFFF]
Flash programming ...
Programming completed in 8.625 s
Total time for flashing process(boot+erase+write) was 1 min 27.485 s
Waiting for device boot up ...
Phone not found, retrying ...
To view links or images in this forum your post count must be 20 or greater. You currently have 0 posts.

harmonication
20th May 2011, 11:26
gara2 di cas kelamaan ya brad?
klo emang gara2 di cas biasane power brad. cek betty/retu/regulator lain nya.
gut lak.....

ihkzan maulana
20th May 2011, 11:37
sama persis dgn grpan ku....dflas nympek versi tertnggi jga hsil ttp cma getar j.....berhrap ada pencerahaan dri sang mster

adhy matrix
20th May 2011, 12:07
coba aja ganti flexibel dan liat hasilx....soal aq bru garap yg kyk gtu dan tembus....

Rusman
20th May 2011, 17:50
sundul lagi .......................

Rusman
24th May 2011, 09:24
cek lagi.......................................

champ
24th May 2011, 09:29
pake mtbox jumat kemaren flash pake mt sukses....kl ga cb test pake hwk pak bos sekalian jajal versi terbaru barangkali bias sukses :piss:

yank flasher
24th May 2011, 09:34
coba sama versi paling tinggi.........

Rusman
25th May 2011, 14:08
masalah selesai ............................

Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.61, (May 10 2011 21:52:47, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: xxxxxxxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk32 / 2010, wk01
Initializing security card...
Card Serial Number: xxxxxxxxxxx
Card Firmware Revision: xxxxxxxxx
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5,00v PASSED
MCU Voltage 3,31v PASSED
Core Voltage 1,79v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,97v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 280 products, Filtering BB5 Products - wait...
Failed to Substitue INI Variant Data -> Access violation at address 0061E384 in module 'Cyclone.exe'. Read of address 00000000
100 Products left after filtering. Ready.
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CF00113FDD38D52F0BEA257DD5435F41D80FED1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
DeadUSB.alg, Type: Algorithm, Rev: , Algo: XSR 1.6
Sending CMT RAW Algorithm...
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing RM-612_20.0.042_prd.core.C00 (CMT)...
RM-612_20.0.042_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x0D39FFFF, ONENAND
Erase Partition (CMT)
Erase taken 1.234s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
All blocks written OK! Time taken 34.125s
Flashing Speed: 26861,45 kBit/S
Processing RM-612_20.0.042_prd.rofs2.V32 (CMT)...
RM-612_20.0.042_prd.rofs2.V32, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x094A0000-0x0C49FFFF, ONENAND
Erase taken 0.297s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
All blocks written OK! Time taken 11.984s
Flashing Speed: 26021,23 kBit/S
Processing RM-612_20.0.042_C01_prd.rofs3.fpsx (CMT)...
RM-612_20.0.042_C01_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0C4A0000-0x0D39FFFF, ONENAND
Erase taken 0.93s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
All blocks written OK! Time taken 0.46s
Flashing Speed: 1418,09 kBit/S
Processing RM-612_20.0.042_uda_11_001.uda.fpsx (CMT)...
RM-612_20.0.042_uda_11_001.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0D3C0000-0x1EF7FFFF, ONENAND
Erase taken 0.31s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
All blocks written OK! Time taken 6.172s
Flashing Speed: 24607,33 kBit/S
Processing RM612_APE_ONLY_ENO_10w20_v0.014.fpsx (CMT)...
RM612_APE_ONLY_ENO_10w20_v0.014.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
Erase taken 0.31s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS*ENO Certificate...
All blocks written OK! Time taken 0.875s
Flashing Speed: 25715,41 kBit/S
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C6-00 USB Phonet]: Port opened OK!
MCU Version V ICPR72_10w28.3
MCU Date 09-11-10
Product RM-612 (Nokia C6-00)
Manufacturer (c) Nokia
IMEI 351503040336511
Mastercode 625161506
IMEI Spare 3A15050304335601
IMEI SV 3315050304335611F2000000
PSN CDI575357
Product Code 0597935
Basic Product Code 0588602
PSD 0000000000000000
LPSN 0
WLAN MAC 20D607130F9B
APE SW v 20.0.042
APE Variant v 20.0.04220.0.042.32.0120.0.042.C01.01
APE Test 0.014
APE HW 256
APE ADSP 256
RETU 16
TAHVO 22
AHNE 11
HW 0900
RFIC |Vapaus_5.1 | Mikki_1.1
DSP ICPR72_10w26
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Rusman
25th May 2011, 14:09
masalah selesai ............................

Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.61, (May 10 2011 21:52:47, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: xxxxxxxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk32 / 2010, wk01
Initializing security card...
Card Serial Number: xxxxxxxxxxx
Card Firmware Revision: xxxxxxxxx
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5,00v PASSED
MCU Voltage 3,31v PASSED
Core Voltage 1,79v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,97v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 280 products, Filtering BB5 Products - wait...
Failed to Substitue INI Variant Data -> Access violation at address 0061E384 in module 'Cyclone.exe'. Read of address 00000000
100 Products left after filtering. Ready.
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CF00113FDD38D52F0BEA257DD5435F41D80FED1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
DeadUSB.alg, Type: Algorithm, Rev: , Algo: XSR 1.6
Sending CMT RAW Algorithm...
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing RM-612_20.0.042_prd.core.C00 (CMT)...
RM-612_20.0.042_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x0D39FFFF, ONENAND
Erase Partition (CMT)
Erase taken 1.234s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
All blocks written OK! Time taken 34.125s
Flashing Speed: 26861,45 kBit/S
Processing RM-612_20.0.042_prd.rofs2.V32 (CMT)...
RM-612_20.0.042_prd.rofs2.V32, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x094A0000-0x0C49FFFF, ONENAND
Erase taken 0.297s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
All blocks written OK! Time taken 11.984s
Flashing Speed: 26021,23 kBit/S
Processing RM-612_20.0.042_C01_prd.rofs3.fpsx (CMT)...
RM-612_20.0.042_C01_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0C4A0000-0x0D39FFFF, ONENAND
Erase taken 0.93s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
All blocks written OK! Time taken 0.46s
Flashing Speed: 1418,09 kBit/S
Processing RM-612_20.0.042_uda_11_001.uda.fpsx (CMT)...
RM-612_20.0.042_uda_11_001.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0D3C0000-0x1EF7FFFF, ONENAND
Erase taken 0.31s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
All blocks written OK! Time taken 6.172s
Flashing Speed: 24607,33 kBit/S
Processing RM612_APE_ONLY_ENO_10w20_v0.014.fpsx (CMT)...
RM612_APE_ONLY_ENO_10w20_v0.014.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
Erase taken 0.31s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS*ENO Certificate...
All blocks written OK! Time taken 0.875s
Flashing Speed: 25715,41 kBit/S
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C6-00 USB Phonet]: Port opened OK!
MCU Version V ICPR72_10w28.3
MCU Date 09-11-10
Product RM-612 (Nokia C6-00)
Manufacturer (c) Nokia
IMEI 351503040336511
Mastercode 625161506
IMEI Spare 3A15050304335601
IMEI SV 3315050304335611F2000000
PSN CDI575357
Product Code 0597935
Basic Product Code 0588602
PSD 0000000000000000
LPSN 0
WLAN MAC 20D607130F9B
APE SW v 20.0.042
APE Variant v 20.0.04220.0.042.32.0120.0.042.C01.01
APE Test 0.014
APE HW 256
APE ADSP 256
RETU 16
TAHVO 22
AHNE 11
HW 0900
RFIC |Vapaus_5.1 | Mikki_1.1
DSP ICPR72_10w26
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Rusman
25th May 2011, 14:16
masalah selesai ............................

Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.61, (May 10 2011 21:52:47, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: xxxxxxxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk32 / 2010, wk01
Initializing security card...
Card Serial Number: xxxxxxxxxxx
Card Firmware Revision: xxxxxxxxx
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5,00v PASSED
MCU Voltage 3,31v PASSED
Core Voltage 1,79v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,97v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 280 products, Filtering BB5 Products - wait...
Failed to Substitue INI Variant Data -> Access violation at address 0061E384 in module 'Cyclone.exe'. Read of address 00000000
100 Products left after filtering. Ready.
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CF00113FDD38D52F0BEA257DD5435F41D80FED1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
DeadUSB.alg, Type: Algorithm, Rev: , Algo: XSR 1.6
Sending CMT RAW Algorithm...
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing RM-612_20.0.042_prd.core.C00 (CMT)...
RM-612_20.0.042_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x0D39FFFF, ONENAND
Erase Partition (CMT)
Erase taken 1.234s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
All blocks written OK! Time taken 34.125s
Flashing Speed: 26861,45 kBit/S
Processing RM-612_20.0.042_prd.rofs2.V32 (CMT)...
RM-612_20.0.042_prd.rofs2.V32, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x094A0000-0x0C49FFFF, ONENAND
Erase taken 0.297s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
All blocks written OK! Time taken 11.984s
Flashing Speed: 26021,23 kBit/S
Processing RM-612_20.0.042_C01_prd.rofs3.fpsx (CMT)...
RM-612_20.0.042_C01_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0C4A0000-0x0D39FFFF, ONENAND
Erase taken 0.93s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
All blocks written OK! Time taken 0.46s
Flashing Speed: 1418,09 kBit/S
Processing RM-612_20.0.042_uda_11_001.uda.fpsx (CMT)...
RM-612_20.0.042_uda_11_001.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0D3C0000-0x1EF7FFFF, ONENAND
Erase taken 0.31s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
All blocks written OK! Time taken 6.172s
Flashing Speed: 24607,33 kBit/S
Processing RM612_APE_ONLY_ENO_10w20_v0.014.fpsx (CMT)...
RM612_APE_ONLY_ENO_10w20_v0.014.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
Erase taken 0.31s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS*ENO Certificate...
All blocks written OK! Time taken 0.875s
Flashing Speed: 25715,41 kBit/S
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
[Nokia C6-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C6-00 USB Phonet]: Port opened OK!
MCU Version V ICPR72_10w28.3
MCU Date 09-11-10
Product RM-612 (Nokia C6-00)
Manufacturer (c) Nokia
IMEI 351503040336511
Mastercode 625161506
IMEI Spare 3A15050304335601
IMEI SV 3315050304335611F2000000
PSN CDI575357
Product Code 0597935
Basic Product Code 0588602
PSD 0000000000000000
LPSN 0
WLAN MAC 20D607130F9B
APE SW v 20.0.042
APE Variant v 20.0.04220.0.042.32.0120.0.042.C01.01
APE Test 0.014
APE HW 256
APE ADSP 256
RETU 16
TAHVO 22
AHNE 11
HW 0900
RFIC |Vapaus_5.1 | Mikki_1.1
DSP ICPR72_10w26
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

edisondjong
25th May 2011, 16:48
n96 hny getar saja!
Apa solusinya gan?
Di boot failed.
Posted via вιaсĸвεггч

rekgaz
25th May 2011, 16:54
mohon solusi nokia C6-00 Rm 612 di hidupkan cuma bergetar saja gk mau hidup di flash di atf sukses tapi gk mau local mode
Number of Image Files: 5

Processing Image File :
RM-612_11.0.029_prd.core.C00
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 482
Entry Point: 0x2AA869
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-612_11.0.029_C01_prd.rofs3.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 5
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00000E00

Processing Image File :
RM-612_11.0.029_prd.rofs2.V32
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 142
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM-612_11.0.029_uda_11_001.uda.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 13000000Hz
Program Sending Speed : 13000000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 77
Entry Point: 0x00FF
Page Format : -1
MAX PAGE : 0x00040000

Processing Image File :
RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 15
Entry Point: 0x0136
Page Format : -1
MAX PAGE : 0x00040000



AUTO SELECTED DEAD USB FLASHING...

If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...

1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..

AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 400C1921
ID DWORD 4 : 01051103
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 0CF00113
ID DWORD 1 : FDD38D52
ID DWORD 2 : F0BEA257
ID DWORD 3 : DD5435F4
ID DWORD 4 : 1D80FED1
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 47 9C 6D DE 39 42 E1 2C 42 9C 1D 6A DE D8 03 71
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 4B9B7510
CRC 1 : 3E691FF8
START FLASHING
RawLoaderExtract: Processing RM-612_11.0.029_prd.core.C00
RawLoaderExtract: Image matches with RootKey Hash, Extraction is done
Parsed OK
RAW LOADER SENT..
FAST PHONE....
(Upto 50 seconds on OLDER phones)
Update Agent Sent..
Waiting for phone to ADL ... (Make take a while)
Found Nokia BB5 ADL Loader USB Generic..
EraseFile: Processing RM-612_11.0.029_prd.core.C00
>> Erasing area 0x00040000 - 0x00082FFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00083400 - 0x003FFFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00800000 - 0x00D5FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00D60000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00040000 - 0x00082FFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00083400 - 0x003FFFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00800000 - 0x00D5FFFF, Type: NAND, Subsystem: CMT
>> Erasing area 0x00D60000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_11.0.029_prd.core.C00
Total blocks to write : 482
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : SOS*UPDAPP
>> CMT Rootkey Hash CERT : SOS*DSP0
>> CMT Rootkey Hash CERT : SOS*ISASW
>> CMT Rootkey Hash CERT : SOS+CORE
>> CMT Rootkey Hash CERT : SOS+ROFS1
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_11.0.029_C01_prd.rofs3.fpsx
>> Erasing area 0x0C4A0000 - 0x0D39FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_11.0.029_C01_prd.rofs3.fpsx
Total blocks to write : 5
>> CMT Rootkey Hash CERT : SOS+ROFS3
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_11.0.029_prd.rofs2.V32
>> Erasing area 0x094A0000 - 0x0C49FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_11.0.029_prd.rofs2.V32
Total blocks to write : 142
>> CMT Rootkey Hash CERT : SOS+ROFS2
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM-612_11.0.029_uda_11_001.uda.fpsx
>> Erasing area 0x0D3C0000 - 0x1EF7FFFF, Type: NAND, Subsystem: CMT
Processing : RM-612_11.0.029_uda_11_001.uda.fpsx
Total blocks to write : 77
Continue Flash Complete : : No Error - 0 (0x00)
EraseFile: Processing RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
>> Erasing area 0x00400000 - 0x007FFFFF, Type: NAND, Subsystem: CMT
Processing : RM612_APE_ONLY_ENO_10w20_v0.014.fpsx
Total blocks to write : 15
>> CMT Rootkey Hash CERT : SOS*ENO
Continue Flash Complete : : No Error - 0 (0x00)
Flashing Done..

Total Flashing Time (Erase + Flashing) : 00:01:12
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 100 seconds)

If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time: 5 Seconds...
Elapsed Time: 10 Seconds...
Elapsed Time: 15 Seconds...
Elapsed Time: 20 Seconds...
Elapsed Time: 25 Seconds...
Elapsed Time: 30 Seconds...
Elapsed Time: 35 Seconds...
Elapsed Time: 40 Seconds...
Elapsed Time: 45 Seconds...
Elapsed Time: 50 Seconds...
Elapsed Time: 55 Seconds...
Elapsed Time: 60 Seconds...
Elapsed Time: 65 Seconds...
Elapsed Time: 70 Seconds...
Elapsed Time: 75 Seconds...
Elapsed Time: 80 Seconds...
Elapsed Time: 85 Seconds...
Elapsed Time: 90 Seconds...
Elapsed Time: 95 Seconds...
Elapsed Time: 100 Seconds...


WARNING: Phone is not in the Required Mode...
Disconnect the Phone and Power it Up Manually.
To view links or images in this forum your post count must be 20 or greater. You currently have 0 posts.

klo soft dah d.krjakan dan msih getar cb Om di goyang IC N2850

rekgaz
25th May 2011, 16:56
koneksi lemod mlh jd doble post.... hadaw.....

@momod: del dong.....

dimasphone
16th June 2011, 12:43
masalah selesai ............................

kasih tau solusinya dong pak bro

adhi bulungan
16th June 2011, 12:47
n96 hny getar saja!
Apa solusinya gan?
Di boot failed.
Posted via вιaсĸвεггч

woy salah kamar:piss::piss::piss:

masalah selesai ............................

masalah selesai ............................

masalah selesai ............................

kalo udah selesai :hmm::hmm::hmm:
selamat ya gan:piss::piss::piss: